Table of Contents
Advertisement
16. Do NOT, under any circumstances, modify or disassemble this product as it may cause fi re,
electric shock, or severe damages to the product. Also any unauthorized modifi cations made to
the product automatically void product warranty.
17. Never touch antenna lines or wires, electrical cables or plugs when lightning or thunder is present
as it may cause electric shock.
18. Any severe physical impact on the product may cause certain components to fall out of place
within and break, which may cause fi re or electric shock. In such event, do not operate the
product. Contact the manufacturer for support.
19. Periodically clean dust off the electrical plug to keep it clean and dry, ensuring proper and safe
operation of the product.
20. Do NOT destroy, process, or place close to any heat source; do NOT bend or twist electrical
cords, electrical plugs, cables, or wires with excessive force; do NOT place any heavy object on
the display as all of the above may cause damage resulting in fi re or electric shock.
21. Do NOT touch electrical plugs with wet hands.
22. Always make sure to plug in the electrical plug fi rmly and completely. Incompletely placed
electrical plugs may cause fi re or electric shock due to built up heat emission.
23. Do NOT use any non-rated electrical sockets or power strips with many other devices jointly
plugged in. The wire of non-designated capacity may cause fi re due to built up heat emission.
Try to use a single, directly dedicated and rated GFCI electrical outlet for the product for safe
operation.
24. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss
of content signals on TV/Display due to internal overheating, immediately turn off and unplug the
electrical cord and contact the manufacturer.
25. Do NOT install the product in unstable locations or near moving objects, constantly vibrating
equipment, or uneven surfaces. Follow mounting instructions properly for safe operation of the
product as improper installation may cause products to fall.
26. Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may
cause fi re.
27. Do NOT install the product near any strong magnetic or electrical current fi eld as it may cause
fi re, electric shock, or severe damages to the product and the product may be subject to
electromagnetic radiation, causing deterioration of the picture quality.
28. Do NOT leave any fi re source, such as candles, close to or on the product as it may be a cause
for fi re or damages to the product.
29. Do NOT move or transport the product with any cables (electrical cables, content connectivity
cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing
connectors of the cables due to forcible bending and stress, which may cause damages to the
waterproof seal of the product, making it subject to fi re, electric shock, or shorted circuit.
30. When unplugging the electrical plug or other cables, always pull using the plug and not the cord.
Improper pulling of the cords or cables may cause damage to the waterproof seal, making it
subject to fi re, electric shock, or a shorted circuit.
31. Do NOT climb on the product.
32. Outdoor displays should always be carried and supported by at least two persons.
33. Do NOT use any other electrical cords or connection cables than what is provided with the
product or from the manufacturer directly. Use of untested, unauthorized, or substituted electrical
cords or connection cables may be a cause for malfunction, fi re, electric shock, or severe
damages to the product. Also such use of improper or undesignated electrical cords or connection
cables will void product warranty.
34. Always leave the Power Off when plugging or unplugging the electrical cords or connection cables
to avoid electric shock or damages to the product.
35. Do NOT use any chemical such as paint thinner or benzene to clean the product's exterior. It may
cause scratches on the surface, erasing proper indications, identifi cation labels, or instructions on
the exterior, which may be a cause for misuse and improper operation of the product.
36. The socket-outlet shall be installed near the equipment and shall be easily accessible.
37. The product is to be secured to building before operation.
4
2017-07-12
#:180-9106-1
Advertisement
Table of Contents
