Basic Connections - JVC LT-46DZ7BJ Instructions Manual

Basic connections

Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
 Connect with other devices "Connecting external devices" (P. 9)

Connect the aerial
After all the connections have been made, insert the plug into an AC outlet.

When using an aerial which needs external power

Care when setting
 Power requirements
Connect the power cord only to a 220-240V, 50Hz

AC outlet.
 When attaching the TV to the wall, use the
optional JVC wall mounting unit
Consult a qualified technician.

See the included manual on mounting procedures.

JVC assumes no responsibility for damage due to

improper mounting.
400mm × 200mm mount which conforms to VESA

standards (200mm).
7
AERIAL
"Power supply for the indoor aerial" (P. 57)

 Installation requirements
To avoid overheating, ensure the unit has ample

room.
200mm
150mm 50mm 150mm 50mm
Connect a VCR / DVD recorder
EXT-2
EXT-1
VCR / DVD recorder
After all the connections have been made, insert the plug into an AC outlet.

Connect "T-V LINK" compatible recording device to "EXT-2".

"T-V LINK" "What is "T-V LINK"?" (P. 11)
 
 When using an indoor aerial which needs external power, connect the aerial directly to the TV.
 "Power supply for the indoor aerial" (P. 57)
Watch pay-TV digital channels
Subscribe to a broadcasting company beforehand. A Viewing
Card (B) will be sent by the broadcasting company after
subscribing to it. It may be necessary for you to purchase a
CAM (Conditional Access Module) (A) in addition to the Viewing
Card. Consult your broadcasting company or retailer.
1 Unplug the power cord
2 Insert "B" into "A".
3 Insert "A".
4 Plug the power cord, and turn the power on.
5 Perform necessary settings "Common Interface" (P. 43)

 Pay-TV analogue channels cannot be watched.
AERIAL
A
B
8