Aktakom ATE-2036 Operation Manual page 21

7-6 Set sampling time ( SecondS )
When the lower display show " SP-t "
1) Use the "
▲
3-6, Fig. 1 ) to adjust the value ( 0, 1, 2, 5, 10, 30,60,
120, 300, 600, 1800,3600 seconds ).
Remark :
If select the sampling time to " 0 second ", it is ready
for manual Datalogger.
2) After the Sampling value is selected, press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-7 SD memory card Format
When the lower display show " Sd F "
1) Use the "
▲
3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Intend to format the SD memory card
no - Not execute the SD memory card format
2) If select the upper to " yES ", press the " Enter Button
" ( 3-4, Fig. 1 ) once again, the Display will show text
" yES Ent " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
Button " ( 3-5, Fig. 1 ) or "
Button " ( 3-5, Fig. 1 ) or "
19
Button " (
▼
Button " (
▼