Epson PictureMate PM 225 User Manual page 54

on encryption, depending on the Bluetooth-enabled
device from which you print.
The Setup menu allows you to make communication
and security settings for Bluetooth printing.
1
Connect the Bluetooth adapter to PictureMate
(see page 24).
2
Press Menu.
3
Press l or r to highlight Setup, then press OK.
4
Press l or r to highlight Bluetooth, then press
OK.
5
To display the device address for PictureMate (set
at the factory), press l or r to select Device
Address, then press OK.
6
Press the Stop/Clear button to go back.
7
Press l or r to select Bluetooth Setup, then press
OK.
8
Choose settings for each of the following options.
Press l or r to choose a setting for each option.
Press OK to save the setting and move to the next
option.
38
Option Settings
Printer ID 0 to 9
(default = 1)
Mode Discoverable
(default)
Not
discoverable
Pairing
Description
If multiple Bluetooth-enabled
printers are in the same
communication range, you
can distinguish them by
assigning each a unique
number (from 0 through 9).
Turn PictureMate off and
then back on when you're
finished.
This mode allows Bluetooth-
enabled devices to freely
discover PictureMate and
send print jobs.
This mode prevents unknown
devices from discovering the
printer. To print in this mode,
first search for PictureMate in
Discoverable mode. After
that, you will be able to print
using this mode.
This mode requires that a
four-digit Passkey be entered
into a device before it can
print from PictureMate.