Print Quality Problems; Software Installation Problems - Epson PictureMate PM 225 User Manual

can then use PictureMate to print from your computer
or the memory card. See page 26.
Printing is too slow.
●
It takes a few moments for PictureMate to process
your images before printing them.
● If PictureMate is in a hot or sunny location, move it
to a cooler place and try printing again.
For faster printing, try these tips:
●
Don't print more than 40 pictures at a time.
●
Photos with borders print faster than borderless
photos.
● Turn off special features such as color effects and
red-eye reduction.

Software Installation Problems

●
Follow the instructions beginning on page 26 to
install your software. Don't connect PictureMate to
your computer until you are instructed to.
●
Close other programs, including screen savers and
virus protection software, and try installing again.
48
● Make sure your system meets the requirements
listed in "System Requirements" on page 74.
●
To print over a network, see "Set Up Network
Printing" on page 54 for instructions on setting up
printing.

Print Quality Problems

You see banding (light lines) in your prints.
●
The print head may need cleaning. See page 41.
●
Be sure to print with the glossy or whiter side of
the paper face up.
● The photo cartridge may need replacing. See
page 30.
● The print head may need aligning. See page 42.
Your print is grainy.
●
The print head may need aligning. See page 42.
● You may need to increase the image resolution;
see your software documentation.