Williams OVERTURE III Owner's Manual page 14

Metronome Function
Press the Metronome button to turn on the
metronome. The LED will light. You will hear the
click in headphones or speakers.
Press the Metronome button again to exit
metronome function. The LED will turn off.
To Change Metronome Time Signature:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select Metronome
signature edit menu. The display will show
"Time Sig".
3. Press the Function button again to enter the
relative parameter edit menu, and the FUNC
indicator will blink to indicate the parameter
is editable.
4. Turn the Value Dial to select a time signature.
The time signature can also be changed with the
following shortcut:
1. Press and hold the [METRONOME] button for 2
seconds. The LCD display will show the current
metronome signature setting and then go back to
current Voice name.
2. Turn the Value Knob to determine the Metronome
time signature while the display shows the
current setting.
The default is 4/4 and the following options are
available to toggle through: 1/4, 2/4, 3/4, 4/4, 5/4,
6/4, 3/8, 6/8, 7/8, 9/8, and 12/8.
14
To Set the Volume Level of the Metronome:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select the Metronome Volume
edit menu. The display will show "Metro Vol".
3. Press the Function button again to enter the
relative parameter edit menu, and the FUNC
indicator will blink to indicate the parameter is
editable.
4. Turn the Value Dial to select the Metronome
Volume range (0-127).
To Set the Tempo:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select Tempo edit menu.
The display will show "Tempo".
3. Press the Function button again to enter the
parameter edit menu. The FUNC indicator will
blink to indicate the value is editable.
4. Turn the Value Dial to select Tempo. (20 - 280)
Transpose Function
This function will transpose the piano keyboard by
up to +12 or -12 semitones.
To transpose the keyboard:
1. Press and hold the [TRANSPOSE] button. The
display will show the current Transpose setting in
the lower right-hand corner of the display.
2. While the Transpose indicator is on, you can
turn the Value Dial to select the Transpose
range (+12 or -12 semitones), or play any key
within the octaves above or below middle C to
automatically jump to that interval.
O W N E R ' S MAN UAL