Advertisement
Step 9:
Slide the canopy/frame connectors (#23) onto
the U-shaped side canopy braces (#10) and
fasten into position by using screws (#18). Make
sure that the teeth on the canopy connectors
are facing towards the inside of the swing.
See Fig. E – Step 1 and Step 2.
Step 10:
Insert the front/rear canopy braces (#11) into the
sleeves on the canopy (#29).
See Fig. E – Step 3.
Step 11:
Insert the front/rear canopy brace (#11) tube
ends into the U-shaped side canopy braces
(#10). See Fig. E – Step 4.
Step 12:
Insert the U-shaped side canopy brace (#10)
corners into the pockets on the canopy (#29).
See Fig. E – Step 5.
Step 13:
Fasten the canopy/frame connectors (#23) to
the adjustable teeth on the top cross beam w/
adjustable teeth (#1) by using a plastic screw
(#24). Do this procedure for both sides.
10
Step 1
Step 3
Step 4
Step 5
Fig. E
24
Fig. F
STOP
DON'T RETURN TO STORE!
PAGE 5 OF 6
23
29
10
29
29
29
23
10
Step 2
11
11
11
10
11
1
23
18 18
24
Advertisement
