Advertisement
Step 6:
Open the seat assembly (#8) and fasten a swing
arm tube (#7) and a swing arm (#6) to the seat
back by using bolt (#16), washers (#20), and
plastic nut (#22). Do the same procedure for
both sides. Fasten another swing arm tube (#7)
to the swing arm (#6) at the front bend by using
bolt (#17), washers (#20), and plastic nut (#22).
Do the same procedure for both sides. Fasten
the other end of the swing arm (#6) to the front
of the seat assembly (#8) by using bolt (#15),
washers (#19), and plastic nut (#21). Do the
same procedure for both sides. See Fig. B.
Step 7:
Hook the suspension springs (#9) into the top
of both swing arm tubes (#7). Do the same
procedure for both sides. See Fig. C.
Step 8:
Hang the opposite ends of the suspension
springs (#9) into the holes located on the angled
braces of the top cross beam w/adjustable
teeth (#1). Do the same procedure for both
sides. See Fig. D.
Warning:
Make sure that both ends of the suspension
springs (#9) go completely through the holes on
the top cross beam w/ adjustable teeth (#1) and
the swing arm tubes (#7).
16
26
Fig. B
Fig. C
9
Fig. D
STOP
DON'T RETURN TO STORE!
PAGE 4 OF 6
7
6
20 22
20
17
20
21
20
19
22
19
15
25
9
9
7
7
7
7
7
8
26
9
7
7
9
7
1
9
7
6
7
Advertisement
