Maintenance; Maintenance Schedule; Fluid Levels; Engine Maintenance - MBW GRP44H4 Operator's Safety And Service Manual

WARNING
Always exercise the stopping procedure before
servicing or lubricating the unit.
After servicing the unit, replace and fasten all
guards, shields, and covers to their original
positions before resuming operation.

Maintenance Schedule

SYSTEM
Engine Refer to engine operator/owner manual
Clean cooling fins
Belt Check for wear and retighten
Exciter Check for oil leaks
Change oil
Tighten Bolts
Hydraulics Check level and refill
Hardware
Check and tighten as needed
Shockmounts Check for cracks or tears
1. Check all hardware after the first 5 hours of use, then follow the maintenance schedule.

Fluid Levels

SYSTEM
Exciter
Hydraulic Oil
Engine
1. MBW #01058 ---- 6-Pack (8 oz. bottles)
MBW #17320 ---- 1 quart (32 oz.)

Engine Maintenance

Refer to the engine owner's manual for maintenance
intervals and procedures.

Engine Speed

Engine speed is factory set.
1.
Do not tamper with the governor setting. The governor
establishes safe operating limits which must not be
exceeded.
2. Refer to the engine Owner's Manual for procedure on
setting operating and idle speeds.
M
AINTENANCE

MAINTENANCE

1
1
FLUID VOLUME
24 oz.
4 oz.
Always verify fluid levels and check for leaks after
changing fluids.
Do not drain oil onto ground, into open streams,
or down sewage drains.
EACH EVERY 50
USE HOURS
X
X
X
X
X
X
RECOMMENDED OIL
MBW Ground Pounder
Chevron AW ISO or Rykon 32
Refer to engine operator/owner manual
3. The engine operating speed should be set to 3600
RPM.
4. The engine idle speed must not exceed 1800 RPM. If
the idle speed is greater than 1800 RPM the clutch
may not disengage.
Belt Adjustment
If any belt stretch develops follow these steps:
Refer to MAIN ASSEMBLY, page 22.
5
- -
CAUTION
EVERY 100 EVERY 250
HOURS HOURS
X
X
X
® 1
Exciter Oil
YEARLY
X
X
X
X
X