How To Use - Panasonic CS-MRE5QKR Operating Instructions Manual

How to use

To select operation mode
MODE
AUTO - For your convenience
• During operation mode selection the
POWER indicator blinks.
• Unit selects operation mode every 3 hours
according to setting temperature, outdoor
temperature and room temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up. The POWER
indicator blinks during this operation.
COOL - To enjoy cool air
• Use curtains to screen off sunlight and
outdoor heat to reduce power consumption
during COOL mode.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a
gentle cooling operation.
FAN - To circulate air in the room
To reach temperature quickly
POWERFUL
POWERFUL
• Press the button again or turn OFF the unit
to stop this operation.
To enjoy quiet operation
QUIET/ECONOMY
• This operation reduces airfl ow noise.
To select fan speed
FAN SPEED
(Remote control display)
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
Auto OFF/ON button
6
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• To use in HEAT mode, press and hold the button until 1 beep is heard, then
release. And press again until 2 beeps are heard, then release.
• Press the button again to turn off.
Remote control
display
AIR CONDITIONER
MODE
OFF/ON OFF/ON
MODE ECONOMY
POWERFUL AIR SWING
FAN SPEED
TIMER TIMER
ON ON SET SET
1 1 2 2 3 3
OFF OFF CANCEL CANCEL
AC RC
SET CHECK CHECK CLOCK CLOCK RESET
MRE5QKR, MRE7QKR, MRE9QKR, MRE12QKR
POWERFUL
AIR SWING
FAN SPEED
MRE18QKR, MRE24QKR
Indicator
(Green)
POWER
(Orange)
TIMER
(Orange)
QUIET/ECONOMY
(Orange)
POWERFUL
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.