REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3,15,16,17 and 19 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 13-1)
1. Remove the screws (A1) x 2 pcs., to remove the loading
motor.
How to remove the pickup (See Fig. 13-2)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2).
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4).
3. Remove the pickup.
Note
After removing the connector for the optical pickup fromthe
connector wrap the conductive aluminium foil around the
front end of connector so as to protect the optical pickup
from electrostatic damage.
All manuals and user guides at all-guides.com
– 13 –
Loading / Up
/ Down Motor
Motor
PWB
Figure 13-1
Stop Washer
( B1 ) x2
( B3 ) x1
ø2.6 x6mm
Shaft
Gear
( B2 ) x1
( B4 ) x1
Figure 13-2
CD-K477W
( A1 ) x2
ø2.6 x5mm
Pickup
CD Mechanism