Renkforce 1518495 Operating Instructions page 2

Operating instructions
Hard disk mounting frame FOUR
Item no. 1518495
Intended use
The product is intended to mount up to four 6.35 cm (2.5") hard disks in one 13.3 cm (5.25")
mounting bay on your PC housing. You may also install one single 8.9 cm (3.5") hard disk and
two 6.35 cm (2.5") hard disks.
For safety reasons, you must not convert and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Frame
• Mounting accessories
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with a flash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• Electrostatic charges may damage electronic components. Do not touch electronic
components with your bare hands.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Installing hard disks
• Install your hard disks as illustrated below.
• Use the provided screws to fasten the hard disks.
Option A
Option B
For option B, install the four provided rubber buffers on the screw holes directly
beneath the large hard disk.
Installation in PC housing
If you do not have thorough knowledge on the installation of this product, have the
installation carried out by a professional or in a specialist shop!
Incorrect installation of the product will cause damage to the product, your computer
and all connected devices.
Caution, risk of fatal injury!
Turn off the computer in which you wish to install the product, and all connected
devices. Disconnect all devices from the power supply by unplugging them. Simply
turning off the devices using the on/off switch does not mean a device is voltage-
free!
• Open your computer's case and remove the lid carefully.
• Insert the product in a free 13.3 cm (5.25") mounting bay, observing the right direction. Fasten
the product in the housing with screws.
• Connect all necessary cables.
• If necessary, fasten all cables using cable ties to prevent them from hanging into your
computer's CPU fan.
• Reclose your computer's case.
• Connect your computer and monitor to the power supply and turn on all devices.
• If your computer does not start up normally, turn it off immediately and check all settings and
cable connections.
Before reopening your computer, disconnect it from the power supply; see above!
Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
Technical data
Operating/storage conditions ........ -10 to +50 °C, max. 95 % RH
Dimensions (W x H x D) ............... 116 x 36 x 147 mm
Weight .......................................... 146 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE. *1518495_V1_1216_02_IPL_m_en