Plug And Play Capability; Universal Serial Bus (Usb) Interface; Usb 3.2 Gen1 (5 Gbps) Upstream Connector - Dell S2522HG User Manual

Plug and Play capability

You can connect the monitor to any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so that the system can
configure itself and optimize the monitor settings. Most monitor installations are
automatic; you can select different settings if desired. For more information about
changing the monitor settings, see

Universal Serial Bus (USB) interface

This section gives you information about the USB ports that are available on the
monitor.
NOTE: This monitor is SuperSpeed USB 5 Gbps (USB 3.2 Gen1)
compatible.
Transfer speed
Super-Speed
High speed
Full speed
*Up to 2 A on USB downstream port (with
charging version-compliant devices or normal USB devices.

USB 3.2 Gen1 (5 Gbps) upstream connector

Pin 9-pin side of the
number
1 VCC
2 D-
3 D+
4 GND
│
22 About your monitor
Operating the
Data rate
5 Gbps
480 Mbps
12 Mbps
connector
monitor.
Power consumption*
4.50 W (Max, each port)
4.50 W (Max, each port)
4.50 W (Max, each port)
battery icon) with battery