Maintenance; Specifications - Black & Decker BCS601 Instruction Manual

32 • ENGLISH
flat against the wood and continue cutting.
Do not remove blade from cut while it is still moving. Blade
must come to a complete stop.

MAINTENANCE

Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
f Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based cleaner.
f Regularly open the chuck and tap it to remove any
dust from the interior.
¡Important! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those listed in this
manual) should be performed by authorized service centers or other
qualified organizations, always using identical replacement parts.
Unit contains no user service able parts inside.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.

SPECIFICATIONS

JIG SAW
Voltage
.../min
No-load speed
(spm)
in.
Stroke length
(mm)
BATTERY
TYPE
Voltage V
Capacity Ah
Type
* Maximum initial battery pack voltage (Measured without
a workload) is 12 volts. Measured under a workload,
nominal voltage is 10,8V.
BCS601
12 V MAX*
0 - 2800
5/8" (16 mm)
BCB001K
AR B2C B3
12 V MAX*
1,5
Lithium-Ion
BR