Multifunction Selector Switch - Indesit DDD 5340 C Instructions For Installation And Use Manual

Multifunction Selector Switch

DDD 5340 C DDD 5340 C DDD 5340 C
The Multifunction selector switch is used when
GB
operating the main oven.
With the exception of the O position the main
oven light will remain on when this selector
switch is used.
Off
With the selector in this position the main oven will
not heat up. The timer will still operate.
Fan Oven
The oven fan and a rear element are controlled when
this function is selected.
Use the main oven thermostat control to set the
required temperature.
Conventional Oven
Top and base elements are controlled when this
function is selected.
Use the main oven thermostat to set the required
temperature.
Half Grill
With this function selected both sides of the grill will
be on, but the outer element is switched off.
Use the oven thermostat control to set the required
temperature.
Oven door must be open for grilling.
Full Grill
Both left and right hand grill elements will be on in
this position.
Use the oven thermostat control to set the required
temperature.
Oven door must be open for grilling.
Fan Grill
The oven fan and fan grill element are controlled
when this function is selected.
Use the oven thermostat control to set the required
temperature.
Oven door must be closed for fan grilling.
Fan Only
The oven fan will operate when this function is
selected.
The oven thermostat control must be set in the off
position.
12
KDD 3340 KDD 3340 KDD 3340
Light Only
This function switches on the oven light only.
After selecting any of the oven programs, the parame-
!
ter setting of the product is activated. It optimizes the
performance of cooking, but could result in a delayed
ignition of fan and heating elements.