Installing The Router - Huawei AR-Sc Series Quick Start Manual

Installing the Router

The methods for installing, connoting and logging in to the AR-Sc, AR-Se, AR-Sa, AR-So
Note
series routers and AR-PM series UPS are similar. AR-Sc-Lc-MC is used as an example here.
AR-PM series UPS cannot be mounted on a Wall.
Scenario 1: Installing the Router on a DIN Rail
Before the installation, ensure the following:
Sufficient space has been reserved for the router.
The DIN rail has been fixed.
Pull the fixture on the DIN rail mounting
1
kit at the back of the router.
Scenario 2: Mounting the Router on a Wall
Installation Method 1
Mark the positions of two mounting
1
holes on the wall.
PWR FXS RS232-0 RS232-1 CAN-0 CAN-1
Eth0/WAN Eth1 Eth2 Eth3 CIL1 CIL2
BLE/RST
Fixture
SIGNAL DI
CIL3 CIL4
Schindler
Place the DIN rail mounting kit onto
2
the DIN rail and press the fixture to
secure the router on the DIN rail.
PW R
Eth 0/W AN
BLE /RS T
Drill holes for ST4.2 tapping screws on
2
the wall using a hammer drill with an
appropriate drill bit.
6
DI
SIG NAL
CAN -1
CAN -0
32-1
RS2 32-0 RS2
FXS
CIL 4
CIL 3
CIL 2
CIL 1
Eth 3
Eth 2
Eth 1
90°
Sc hi nd le r