Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CD
Disc Change
You can change the outer two discs while
the third inner disc is stopped or is playing.
1 Press DISC CHANGE.
™ The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
• If you wish to change the inner disc
during playback, press DISC CHANGE
again.
™ "DISC CHANGE" will be
displayed.
™ The CD will stop playing.
™ The CD carousel tray will close to
retrieve the inner CD and then open
again with the inner CD accessible.
3 Press OPEN•CLOSE to close the CD
carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1 Press í or ë until the desired track
appears on the display.
2 PressÉ to start playback.
™ The selected track number and
elapsed playing time appear on the
display.
14
Untitled-5
14
Selecting a desired track during
Programming Tracks
playback
Programming tracks of a loaded CD is
• Press í or ë until the desired track
possible when playback is stopped. The
appears on the display.
display will indicate the total tracks stored
™ The selected track number and
in the program. Up to 40 tracks can be
elapsed playing time appear on the
stored in the memory in any order. When
display.
40 tracks are stored and you attempt to
• If you press í once it will skip to the
store another track, the display will show
beginning of the current track and play
"FULL".
the track again.
1 Load the desired discs in the disc trays.
Note:
2 Press PROG to start programming.
– Pressing í during shuffling can only skip
™ The
to the beginning of the current track.
™ It will cancel any previously selected
Searching for a particular
3 Press the CD (CD 1•2•3) or DISC 1/2/3
passage during playback
button to select the disc.
4 Press í or ë to select the desired
• Press and hold à or á until the
track.
desired passage is located.
5 Press PROG to store the track.
™ The volume will be reduced.
• Repeat steps 3 - 5 to store other discs
• Play returns to normal when à or á
and tracks.
is released.
6 Press Ç once to end programming.
™ The total number of tracks
Notes:
– If the total playing time is more than
" 99:59 " or if one of the programmed
tracks has a number greater than 30,
then " --:-- " appears on the display
instead of the total playing time.
– If the system is reading the disc,
programming is not possible,
" READING " will be displayed and
followed by " DISC X ". " X " is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible only
when playback is stopped.
starts flashing.
PROGRAM
1 Press í or ë repeatedly to review
the programmed tracks.
repeat mode.
2 Press Ç once to exit review mode.
Playing the program
1 Press É to start program playback.
™ "PLAY PROGRAM" will be
displayed.
™ The track number and elapsed
playing time of the current track will
appear on the display.
programmed and total playing time
• If you press REPEAT during program
appear on the display.
playback, the current track or all
programmed tracks will be played
repeatedly.
™ "TRACK" or "PROGRAM" will be
displayed.
™ The
the display.
2 Press Ç to stop program playback.
6/8/01, 10:26 AM
and
appear on
REPEAT
PROGRAM
3139 116 19751
Advertisement
Table of Contents
