Epson FX-1170 Specifications page 2

FX-870/1170
Note: You can use recycled paper with this printer. If you notice an
increase in ribbon consumtion and paper jamming, use a higher
Labels:
63.5 x 23.8 mm (2.5 x 0.93 inches)
Size
101 x 27 mm (4 x 1.06 inches)
0.07 to 0.09 mm (0.0028 to 0.0031 inches)
Thickness
for backing sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches)
total
conditions.
Envelopes:
Size No. 6 - 166 x 92 mm (6.5 x 3.6 inches)
No. 10 - 240 x 104 mm (9.5 x 4.1 inches)
0.16 to 0.52 mm (0.0063 to 0.0197 inches)
Thickness
Weight 45 to 90 g/m2 (12 to 24 lb)
humidity conditions.
Roll paper:
Size 216 k 3 mm (8.5 f 0.12 inches)
Thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inches)
Weight 52.3 to 82 g/m2 (14 to 22 lb)
Printable area:
Single sheets
-
A The minimum top margin is 8.5 mm (0.33 inches).
8
maximum printable width is 203 mm (8 inches) for the standard-wtdth
FX-870/1170-2
-
Continuous paper
A The minimum top and bottom mafgins (above and below the perforation) are
9 mm (0.35 inches).
The minimum left and ttght margins am 13 mm (0.51 inches). However, the
Envelopes
A The minimum top margin is 8.5 mm (0.33 Inches).
Roll paper
A The minimum top margin is 8.5 mm (0.33 inches).
The minimum left and right margins are 3 mm (0.12 inches). However, the
10/13/92
A
9-Pin Printers