Advertisement
Quick Links
User Manual ► FEISOL CT-3371 and CT-3471
A.
Mount and Center Column Installation
For exchanging Mounts (flat Ball Head Mount / Center Column Mount / Leveling Base/
Video Pan) on the Tripod, unscrew the three small set screws on top of the mainframe
using the included hex key (see picture), insert desired Mount and re-tighten the three
screws. To avoid possible damage to the screws or Tripod, do not over-tighten them.
B. Leg Tension Adjustment
Insert the two hexagonal wrenches (included) into the two screws at the base of the leg
(see picture) and tighten or loosen them to the desired friction, by turning the wrenches in
opposite directions.
WWW.FEISOL.NET
© FEISOL INC, USA
Page 1 of 4
Advertisement
Related Manuals for feisol CT-3371
Summary of Contents for feisol CT-3371
- Page 1 User Manual ► FEISOL CT-3371 and CT-3471 Mount and Center Column Installation For exchanging Mounts (flat Ball Head Mount / Center Column Mount / Leveling Base/ Video Pan) on the Tripod, unscrew the three small set screws on top of the mainframe using the included hex key (see picture), insert desired Mount and re-tighten the three screws.
- Page 2 (backpack, weight bags) to be attached to the tripod. The Hook can be screwed onto the bottom of the Mounting Plate. On an optional Center Column, a Weight Hook is pre-installed (see picture). WWW.FEISOL.NET © FEISOL INC, USA Page 2 of 4...
- Page 3 When using an optional Center Column, making sure that the Center Column and the Ball Head’s Panning Knob are securely locked, screw the Ball Head onto the 3/8” Mounting Screw by turning the Ball Head clockwise (see picture). Do not over-tighten. WWW.FEISOL.NET © FEISOL INC, USA Page 3 of 4...
- Page 4 Note that damage to your tripod’s Carbon Tubes or Aluminum parts can occur if they are dropped, squeezed, overloaded, or forced downward (e.g. into sand dunes or snowbanks). Exercise caution to avoid such conditions. WWW.FEISOL.NET © FEISOL INC, USA Page 4 of 4...