Table of Contents
Advertisement
operation
switching on your unit
1. Connect the mains cable to the mains socket. The
internal temperature of your unit is controlled by an
electronic control panel on the door.
2. Press
for 1 second to switch on the unit and 5
seconds to switch off the unit. If temperature has
been set previously, the previous setting will be
displayed when switching on the unit again.
3. Press
repeatedly to set temperature for the
fridge (2 to 8°C).
4. The unit may not operate at the correct temperature
if it is in a particularly hot or a particularly cold room,
or if you open the door often.
5. To ensure that the unit is cool enough to sufficiently
chill your food, wait 24 hours before filling it with
food.
6. If you are concerned that your unit is not being kept
cold enough and wish to check the temperature, you
will need a special fridge/freezer thermometer. These
are available from most supermarkets and hardware
shops. Place the thermometer in the fridge and leave
overnight. The correct temperature for the fridge
should be at the recommended 0-8°C.
super cool mode
• Press
to activate the super cool mode. The light will be illuminated. Temperature in the
fridge is quickly lowered and food in the fridge can be kept fresh for a longer period.
•
To switch off, press
Otherwise, super cool mode will also automatically deactivate after 6 hours, and the fridge
temperature will set to 2°C. The light will extinguish.
holiday mode
• If you will be away for a period of time, you can set the fridge to holiday mode. Press and hold
for 3 seconds to activate the holiday mode. The light will be illuminated. Temperature in the
fridge will automatically set to 15°C. Do not store any food in the fridge during holiday mode.
• To switch off, press either
previous setting. The light will extinguish.
, and the fridge temperature will resume to the previous setting.
or
,
or
, and the fridge temperature will resume to the
15
Advertisement
Table of Contents
