Changing The Programme Or Adding Laundry; Cancelling The Programme; Programme End; Removing Laundry And Switching Off The Dryer - Siemens WT46G491GB Installation And Operating Instructions Manual

Operating the appliance
en
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
To pause the programme, open the
1.
dryer door or press the Start button.
Add or remove laundry.
2.
Select another programme or an
3.
additional function, if required.
Close the dryer door.
4.
Press the Start button.
5.
Note:
The programme duration in the display
panel is updated depending on the load
and residual moisture in the laundry.
The values displayed may change after
the programme is changed or the load
is adapted.

Cancelling the programme

The programme can be interrupted at
any time; to pause, open the dryer door
or press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, you must
remove the laundry items and spread
them out so that the heat can disperse.

Programme end

"Ÿš appears in the display panel.
26
Removing laundry and
switching off the dryer
Remove the laundry.
1.
Turn the programme selector to the
2.
"off" position.