Selecting The Interface; Macintosh Users - Epson EPL-7500 Setup Sheet

Selecting the Interface

®
IBM and Compatible Computer Users
Users of IBM and compatible computers can skip to the next
section because the parallel interface is already selected.
Macintosh Users
®
Follow the simple 10-step procedure below to select the EPL-7560's
®
AppleTalk interface before connecting your Mac
CAUTION: Do not connect the cable before you have
selected the AppleTalk interface on the EPL-7500.
To select the AppleTalk interface, follow these steps:
1. Turn on the printer and wait until it prints the start page.
2. Press ON LINE to take the printer off line.
3. Press
SelecType
4. If INTERFACE does not appear on the display, press m
once. INTERFACE appears on the display.
twice. The level 2 light comes on.
- 6 -
®
to the printer.