Epson EPL-7500 Setup Sheet page 7

5. Press 1,1 once and then press m until APPLETALK
appears on the display.
6. Press m once. SELECTED appears briefly on the display;
then APPLETALK* appears. The asterisk (*) shows that
AppleTalk is selected.
7. Press m once, then m once, then m once.
8. Press m until SAVE LEVEL 2 appears on the display.
9. Press m once.
10. Turn the printer off.
CAUTION: If you connect an AppleTalk cable, never
operate the printer with the SelecType INTERFACE
APPLETALK setting may leave your printer inoperable or
- 7 -