BenQ GL2055 Product Service Manual page 22

1.5 Wrong marking of model number
1.6 Wrong serial # marking on carton
1.7 Product wrongly placed in box ( upside down )
1.8 Broken polyfoam or PU foam
1.9 Broken packing bag
1.10 Wrong size or poor printing for artwork/character
1.11 Bar-code wrong, missing, or damaged
1.12 Label on box missing or damaged
1.13 Strange object in the box
1.14 Unit not corresponding to model stated on external label
1.15 Superficial breaking 5 ~ 10 cm dia
2 Accessories
2.1 Missing accessory parts
2.2 Wrong Accessory parts
3 Appearance of product
3.1 Incorrect color of cabinet
3.2 Incorrect color of tilt/swivel base
3.3 Wrong logo or name plate
3.4 Poor print of logo or name plate
3.5 Label on product Wrong or missing
3.6 Scratched or dirty but legible spec. label
3.7 GAP between LCD and front bezel is over 1.5 mm
3.8 Dot/area discolor over 1mm dia. in front or over 2mm dia. in other areas
3.9 Cabinet warped, sagged or bulging ＞0.5% of surface length
3.10 Cabinet warped, sagged or bulging noticeable but ＜0.5% of surface length
3.11 Sharp stud or edge, which can cause damage not safe
3.12 Finishing of piece parts will not arrived in good condition at the customer
3.13 Step ( between real cover and bezel ) ＞-0.3mm , < 0.5mm
3.14 Step ( between real cover and bezel ) ＞0.5mm
3.15 Wiring or fixing cord comes out of cabinet or jammed
3.16 Auxiliary material used during production not removed
3.17 Cabinet parts come loose during normal handling, not safe
3.18 Cabinet parts come loose during normal handling, but safe
3.19 Tilt/swivel too flexible/not working
3.20 Tilt/swivel stiff
3.21 Dirty front bezel and housing can‟t remove
3.22 Dirty front bezel and housing removable easily
3.20 Sticker or loose user control switch which will not function correctly
3.21 Missing knob or switch, not safe
3.23 Missing knob or switch, but safe
3.24 Poor functional user controls in mechanical
3.25 Unreadable printing of user controls label
3.26 Rubber foot missing
3.27 LED wrong material or missing
3.28 Gap between bezel and button >0.4
3.29 Wrong S/N between spec. label and monitor display
4 AC power and signal cable
4.1 AC power or connector not correct or damaged, not safe
4.2 AC power or connector not correct or damaged, but safe
4.3 Signal cable contact pin dirty
4.4 Signal cable plug dirty or surface damaged, but safe
- 22 -
Major
Major
Major
Major
Major
Major
Major
Major
Major
Major
Minor
Major
Major
Major
Major
Major
Major
Major
Minor
Major
Major
Major
Minor
Major
Major
Minor
Major
Major
Major
Critical
Major
Major
Minor
Major
Minor
Major
Critical
Major
Major
Major
Major
Major
Major
Major
Critical
Major
Minor
Minor