AEG L8TEN65C User Manual page 23

Compartment for liquid additives (fabric conditioner, starch).
The mark
Flap for powder or liquid detergent.
13.4 Liquid or powder
detergent
1
CLICK
3
• Position A for powder detergent
(factory setting).
• Position B for liquid detergent.
When you use the liquid
detergent:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
then the maximum level.
• Do not set the delay start
function.
13.5 Setting a programme
1. Turn the programme knob. The
related programme indicator comes
on.
The indicator of button Start/Pauze
flashes with red colour.
The display shows the default
temperature, the spin speed and the
empty indicator bars of the available
functions.
2. To change the temperature and/or
the spin speed, press the related
buttons.
is the maximum level for the quantity liquid additives.
M
CLICK
2
4
3. Set the available functions.
13.6 Starting a programme
without the delay start
Press button Start/Pauze to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
The drain pump can operate
for a short time when the
appliance fills water.
ENGLISH 23
A
B
.