Troubleshooting - Electrolux EWF8025DGWA User Manual

9.

TROUBLESHOOTING

Certain problems are due to lack of
simple maintenance or oversights,
which can be solved easily without
calling out an engineer. Before
contacting your local Service Centre,
please check possible cause of
malfunction and solution listed below.
Once the problem has been eliminated,
press the Start/Pause button to restart
the program. If after all checks, the
problem persists, contact your local
Service Centre.
WARNING! Deactivate the
appliance before you do the
checks.
Malfunction
The washing
machine
does not
start:
The machine
does not fill
the water:
Possible cause
The door has not been closed.
Error code: .
The plug is not properly inserted
in the power socket.
There is no power at the socket.
The Start/Pause button has not
been pressed.
The Delay End has been
selected.
The Main supply is unstable.
Error code:
The water tap is closed.
Error code: .
The inlet hose is squashed or
kinked.
Error code: .
The filter in the inlet hose is
blocked.
Error code: .
The door is not properly
closed. Error code:
Alarm Code:
The appliance does not fill with water
properly.
The appliance does not drain the
water.
The appliance door is open or not
closed correctly. Please check the
door!
The main supply is unstable.
Wait until the main supply is stable.
No communication between
electronic elements of the appliance.
Switch off and switch on again.
Water leaks inside the machine.
Please call Service Centre.
Solution
Close the door firmly.
Insert the plug into the
power socket.
Please check your domestic
electrical installation.
Press the Start/Pause
button.
If the laundry are to be
washed immediately, cancel
the Delay End.
Wait until the main supply is
stable. Appliance will start
automatically.
Open the water tap.
Check the inlet hose
connection.
Clean the water inlet hose
filter.
Close the door firmly.
.
ENGLISH 23