Table of Contents
Advertisement
Note: We will explain the operating procedure of one channel as the procedure for
channel A and B is identical.
2. Connecting the battery
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS
TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK.
WARNING!
1) LiPo Battery Connection with Balance Adapter
Balance Socket
For safety reasons, the default setting for charging Lithium (LiPo, Lilon, LiFe and LiHV)
battery is using balance adaptor to connect battery and charger in Charge, Fast Charge,
Balance Charge, Discharge and Storage modes. But if the battery comes without balance
wire,please proceed with the prompting message "No balance cable detected, push
enter to continue".
The balance wire attached to the battery must be connected to the charger with the
black wire aligned with the negative marking. Ensure correct polarity!
2) NiMH/NiCd or Pb Battery Connection
D260
Power and Battery Connection
LiPo
NiMH
11 ·
Advertisement
Table of Contents
