Skyrc eFUEL PSU 30A Instruction Manual

INSTRUCTION MANUAL
INTRODUCTION
Thank you for purchasing the eFUEL 30A Switching DC Power Supply. We are confident that you will be
delighted with its performance because our Switching DC Power Supply is designed and manufactured by skilled
professionals using the highest standard in workmanship.
Your eFUEL switching DC Power Supply is designed to use mains electricity to power equipment that requires
DC power. The eFUEL converts standard household power 100-240V AC to 12-18V DC power and can supply
up to 30 amperes of continuous power.
Dual DC output ports are converted from banana connectors to XT60 battery connectors. It gets more
convenient & safe for charging the most popular battery with XT60 connector and avoid the possibilities of
reverse polarity.
Ventilation Fan
Do Not
!
Cover
Power
: -
INPUT 100 240V AC
Switch
Power
Cooling AC Power
Fan Input Switch
Current & Voltage
Readout
Voltage Adjustment Dial (12V-18V)
FEATURES
* Two DC power outputs, up to 30 amperes
* Output voltage of adjustable 12-18V
* Large LCD indicates voltage and current output
* Two USB ports, 5V/1000mA total for MP3 player, mobile phone, and digital cameras
* Smart cooling fan
* Over-temperature protection
* Overload protection
* Short circuit protection
* Overvoltage protection


30A SWITCHING DC
POWER SUPPLY
USB Power
Dual DC
5V / 1A
Output
1
OPERATION
1. Ensure that the power switch is OFF before connecting to the mains power socket. If the switch is ON,
your Power Supply may be damaged due to power surges.
Adjust the voltage by rotating the dial according to the loads. ( 12-18V)
2.
3. Connect the loads. Please check the current of loads should not exceed 30 amperes. When the
current is over 30A, the Overload protection procedure will be activated. The Power Supply will cut off
SK-200013
the DC output and indicate "OCP" on the display. If you want to reset your Power Supply, TURN OFF
the Power Supply, reduce the loads after "OCP" disappear, then TURN ON.
Caution: Remove the output connections after use.
Caution: Place your power supply in a well ventilated open, and cool area. Do not block the fan
on both sides.
Caution: Your power supply might cause TV or radio interference even when it is operating
properly. To check whether your power supply is the reason causing the interference, turn off
your power supply. If the interference goes away, your power supply is causing it.
Try to eliminate interference by:
Keep distance between the power supply and TV or radio.
Connect the power supply to an outlet on a different electrical circuit from the TV or radio.
Contact a qualified technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Warning: To reduce the risk of fire or electric shock, carefully follow all the instructions. This manual
Cooling
contains important safety and operating instructions for this power supply. Before you use the power
Fan
supply, read all the instructions and cautions markings in this manual of the power supply and the product
that you will connect to the power supply to reduce the risk of injury:
Do not use the power supply near water (for example, a bathtub, washbowl, kitchen sink, laundry tub,
wet basement, or swimming pool).
Do not place the power supply on an unstable cart, stand or table. If the power supply falls, it could
injure a person or cause severe damage to the power supply.
Do not overload power outlets or extension cords. An overload can result in fire or electric shock.
Do not disassemble this unit; take it to a qualified service technician when service or repair is required.
Improper reassembly may result in a risk of electric shock or fire.
Do not use an attachment not recommended. This could result in a risk of fire, electric shock, or injury
to persons.
Never push any object into the slot in the power supply. It could touch dangerous voltage points or
short-out parts resulting in a fire or electrical shock.
Caution: To reduce the risk of damage:
Do not operate the power supply if it has been dropped or damaged in any way. Please take it to a
qualified service technician for repair.
The power supply should be operated only from a standard AC outlet that provides 100-240V, 50-60
Hz. If you are not sure of the type of power supplied to your home, consult your local utility company.
2