Team Blacksheep TBS MAMBO Radio Manual page 29

Bind
Connecting to a new Tracer receiver is simple and done via the Agent Lite .
Model ID
When you bind a receiver you can set up if it should only bind to a specific receiver. This feature is useful
if you use a Model without flight controller or different fc types or model settings. The ID must be set up
before the binding! Otherwise you need to rebind your receiver.
1. Press and hold the Menu-button and select
TBS Agent Lite , then select
Mambo Tracer/ Bind
2. Connect power to the Tracer receiver. If the
receiver is not flashing slow green, press the
Bind-button on it
3. Select the Bind-menu item, follow the
messages on the display and wait for the
binding process to complete.
If you have issues during the binding, check the Tracer
manual as well as the FAQ section for other problems.
1. Navigate to the model settings
2. Scroll down to Receiver ID
3. ID = 0...99: this model will only bind to
receivers previously bound to this id
The details on Model Id/ receiver Number can be
found in the Tracer manual
29