1. Manuals
  2. Brands
  3. Middleby Manuals
  4. Kettle
  5. CROWN ELT-20F
  6. Installation & operation manual

Middleby CROWN ELT-20F Installation & Operation Manual

Self generating steam full jacket tilting kettles
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
INSTALLATION & OPERATION
MANUAL
Self Generating Steam Full Jacket Tilting Kettles
ELT-20
ELT-30
ELT-40
ELT-60
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read
the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
CROWN FOOD SERVICE EQUIPMENT
y
A Middleby Compan
70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9
Telephone: 919-762-1000
www.crownsteamgroup.com
Printed in Canada
MANUAL 10170R3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CROWN ELT-20F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Middleby CROWN ELT-20F

Summary of Contents for Middleby CROWN ELT-20F

  • Page 1 Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. CROWN FOOD SERVICE EQUIPMENT A Middleby Compan 70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9 Telephone: 919-762-1000 www.crownsteamgroup.com...

  • Page 2: Important Notes For Installation And Operation

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F IMPORTANT NOTES FOR INSTALLATION AND OPERATION This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Table Of Contents

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F TABLE OF CONTENTS DESCRIPTION PAGE Important Notes for Installation and Operation........2 1.0 Service Connections ..

  • Page 4: Service Connections

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 1.0 SERVICE CONNECTIONS Part No. 10170R3 2018-07-19...

  • Page 5: Installation Instructions

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 2.0 INSTALLATION INSTRUCTIONS UNPACKING Immediately after unpacking, check for possible shipping damage. If the kettle is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the right side of the tilt console.
  • Page 6 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 2.0 INSTALLATION INSTRUCTIONS (Continued) WARNING: Disconnect the electrical power supply and place a tag at the disconnect switch to indicate that you are working on the circuit.

  • Page 7: Introduction

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 3.0 INTRODUCTION DESCRIPTION All electrically powered kettles described and referred to in this manual are pressure vessels of a double-wall construction forming a sealed jacket (chamber) enveloping the kettle bowl surface.
  • Page 8 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F FUNCTIONING MODE All electrically powered self-generating, steam jacketed kettles, consist of a jacket containing a permanent solution of distilled water sufficient to completely immerse and protect replaceable electric heating elements.

  • Page 9: Operation Instructions

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 4.0 OPERATION INSTRUCTIONS WARNING: The kettle and its parts are hot. Use care when operating, cleaning and servicing the kettle. Ensure that the external electrical service to kettle is on. Check pressure gauge for correct cold kettle reading.
  • Page 10 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 4.0 OPERATION INSTRUCTIONS (Continued) Place thermostat knob at required temperature setting from 1 to 10 coinciding with the following table: THERMOSTAT APPROXIMATE (JACKET) SETTING TEMPERATURE 90 Fahrenheit...

  • Page 11: Cleaning Instructions

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 5.0 CLEANING INSTRUCTIONS CAUTION: Do not use cleaning agents that are corrosive. WARNING: Disconnect the power supply to the appliance before cleaning or servicing. WARNING: Never spray water into electric controls or components! CAUTION: The equipment and its parts are hot.
  • Page 12 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F DRAW-OFF VALVE CLEANING 1. If equipped with a tangent draw-off valve, turn the large hex nut on the draw-off valve counterclockwise until it is completely disengaged from the threads. Grasp the valve knob and slowly pull out the valve stem.
  • Page 13 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F WHAT TO DO IF SURFACE RUST APPEARS Metal utensils should never be used as they will scratch the surface of the equipment and rust may begin to form.
  • Page 14 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F STAINLESS STEEL (Continued) TO REMOVE HEAT TINT: Darkened areas sometimes appear on stainless steel surfaces where the area has been subjected to excessive heat. These darkened areas are caused by thickening of the protective surface of the stainless steel and is not harmful.

  • Page 15: General Maintenance

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 6.0 GENERAL MAINTENANCE No general maintenance is required other than adhering to the Cleaning Procedure instructions. WARNING: At least twice a year have an authorized service person clean and service the unit for maximum performance.

  • Page 16: Troubleshooting

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 7.0 TROUBLESHOOTING 7.1 LOW WATER LEVEL Proper water level must be maintained within the jacket for the kettle to operate. Depletion of water may occur from excessive opening of or leakage through the safety relief valve. If water is below required operating level, either initially at start-up or during use, the kettle will automatically shut off and the LOW WATER signal light will come on.
  • Page 17 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 7.0 TROUBLESHOOTING (Continued) 7.2 EXTREMELY SLOW COOKING TIME 1. If the cooking time is abnormally slow, then the difficulty may be due to air being present in the kettle jacket.
  • Page 18 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F 7.0 TROUBLESHOOTING (Continued) NOTICE: Draw-Off Valve has a vulcanized rubber coated stem for better sealing. Do not over-tighten. This may cause the rubber to pull away from stem and permanently damage it.

  • Page 19: Appendix A, Material Safety Data Sheet

    INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F APPENDIX ‘A’ MATERIAL SAFETY DATA SHEET PREPARATION INFORMATION: Prepared for use in Canada by: E H & S Product Regulatory Management Department DOW CHEMICAL CANADA INC. P.O.
  • Page 20 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Clear yellow liquid.
  • Page 21 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 4. FIRST AID EYES: Flush eyes with plenty of water.
  • Page 22 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 HAZARDOUS COMBUSTION PRODUCTS: During a fire, smoke may contain the original material in addition to unidentified toxic and/or irritating compounds.
  • Page 23 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 6. ACCIDENTAL RELEASE MEASURES (See Section 15 for Regulatory Information) PROTECT PEOPLE: Use appropriate safety equipment.
  • Page 24 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 EXPOSURE GUIDELINES: Propylene glycol: AIHA WEEL is 50 ppm total, 10 mg/m3 aerosol only.
  • Page 25 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 SKIN: The LD50 for skin absorption in rabbits is >10,000 mg/kg.
  • Page 26 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 FOR UNUSED AND UNCONTAMINATED PRODUCT, the preferred options include sending to a licensed, permitted: recycler, reclaimer, incinerator or other thermal destruction device.
  • Page 27 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 U.S. REGULATIONS SARA 313 INFORMATION: To the best of our knowledge, this product contains no chemical subject to SARA Title III Section 313 supplier notification requirements.
  • Page 28 INSTALLATION AND OPERATION MANUAL, SELF-GENERATING STEAM FULL JACKETED TILTING FLOOR MOUNTED KETTLES, MODELS ELT-20F, ELT-30F, ELT-40F, ELT-60F MATERIAL SAFETY DATA SHEET Product: DOWFROST* HD HEAT TRANSFER FLUID, DYED Product Code: 04632 Effective Date: 02/20/01, Date Printed: 07/10/02, MSD: 002239 CANADIAN REGULATIONS WHMIS INFORMATION: The Canadian Workplace Hazardous Materials Information System (WHMIS) Classification for this product is: This product is not a “Controlled Product”...

This manual is also suitable for:

Crown elt-30fCrown elt-40fCrown elt-60f

Table of Contents