Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Summit Commercial BIM100ADA
Summary of Contents for Summit Commercial BIM100ADA
- Page 1 100LB. ICE MACHINE User Manual MODELS: BIM100, BIM100ADA, SCIM101, ALIM100 Felix Storch, Inc. Summit Appliance Division Write Serial No. of unit here: An ISO 9001:2015 registered company 770 Garrison Avenue Bronx, NY 10474 ________________________________ www.summitappliance.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important Safety Instructions Precautions Grounding Instructions Location of Parts Installation Instructions Before Using your Ice Maker Installing the Ice Maker Installing the Leveling Legs Connecting the Water Line Installing the Purification Filter Operation Ice Full Sensor Ice Thickness Sensor Changing the Purification Filter Cleaning Cleaning the Ice Bin... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION BEFORE USING. WARNING: RISK OF CHILD ENTRAPMENT Child entrapment and suffocation are not problems of the past. Unused or abandoned icemakers are still dangerous, even if they will just “sit in the garage a few days.” •... -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS WARNING: Improper use of the grounding plug can result in a risk of electric shock. • This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. •... -
Page 5: Location Of Parts
LOCATION OF PARTS (Front) (Rear) (Interior) -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Before Using the Ice Maker • Remove any exterior or interior packaging. • Attach the four leveling feet to the bottom of the appliance. NOTE: Before connecting the ice maker to a power source, let the appliance stand upright for approximately two hours. -
Page 7: Connecting The Water Line
Connecting the Water Line Water Temperature Water Pressure Water piping size ◦ 50 – 90 20 – 80 psi 3/8 “ Ice maker water supply • • 3/4 “ Ice maker water drain (Rear) • Connect a 3/8” diameter pipe to the tap water line. •... -
Page 8: Ice Full Sensor
An automatic sensor stops ice making once the ice box is full. Remove the finished ice from the ice basin to resume the automatic ice making operation. Ice Thickness Sensor An ice bridge thickness of 3.2mm (.012”) is set as the factory default. Rotate the control screw counter-clockwise to make the ice bridge thinner, and clockwise to make the ice bridge thicker. -
Page 9: Cleaning The Condenser Filler
Cleaning the Condenser Filter 1. Pull the condenser filter up and out of the front panel. 2. Use a vacuum cleaner to remove any dust. 3. Wipe the filter with a solution of 10g (0.35oz) of a neutral detergent, such as baking soda, in 3L (0.8gal) of warm water. 4. -
Page 10: Troubleshooting
The ice scoop and ice damper must be sanitized separately in 0.26 gal (1L) of sanitizer diluted in 5.4 gal (20L) of water. Once the scoop, ice damper, and ice basin have been sanitized, reassemble all sanitized components. When the first sanitizing procedure is complete, remove the packing down from the ice basin by pulling downward. -
Page 11: Technical Specifications
Ice making does not Water is not supplied into the water bowl. Ensure water line is connected. take place TECHNICAL SPECIFICATIONS Specification Item Unit BIM100, BIM100ADA, SCIM101, ALIM100 Maximum Ice Making Kg /day 50(110.2) (Based on 10 ℃ ) (Lbs./day) Freezing Capability Ice is made after 30 minutes. -
Page 12: Limited Warranty
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship.
Need help?
Do you have a question about the BIM100ADA and is the answer not in the manual?
Questions and answers