Fig. 33: Diffuser - ABB A150-M68 Operation Manual

Operation Manual / A150-M58/68
7 Periodic maintenance work / 7.4 Cleaning components mechanically
Fig. 33: Diffuser
79000 Compressor casing
01 Diffuser surfaces
02 Diffuser annulus
03 Slots
All of the surfaces on the diffuser must be free of contamination after cleaning. In the
u
case of slotted diffusers, this applies in particular to the diffuser slots (03) and the dif-
fuser annulus (02).
Cleaning procedures should be selected that do not result in removal of the diffuser's
u
base material or damage to its surfaces.
The evenness of all surfaces (01) between the diffuser blades must be checked visually.
u
The surfaces must be flat and even. Any deformations or deteriorations of the surface
caused by the cleaning process are not permitted.
Have damaged diffusers replaced by an ABB Turbocharging Service Station.
u
© Copyright 2021 ABB. All rights reserved. HZTL4041_EN Rev.E January 2021