Storing The Machine - Stihl TS 440 Instruction Manual

English
► Remove the spark plug boot (3).
► Unscrew the spark plug (4).
16.2 Checking the Spark Plug
► Clean dirty spark plug.
► Check electrode gap (A) and readjust if neces‐
sary – see "Specifications".
► Rectify the problems which have caused foul‐
ing of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
28
3
4
A
1
WARNING
Arcing may occur if the adapter nut (1) is loose
or missing. Working in an easily combustible or
explosive atmosphere may cause a fire or an
explosion. This can result result in serious inju‐
ries or damage to property.
► Use resistor type spark plugs with a properly
tightened adapter nut.
16.3 Installing the spark plug
► Fit the spark plug by hand and screw it in
► Tighten spark plug with combination wrench
► Press the spark plug boot firmly onto the spark
plug
► Position the cap for the spark plug boot and
screw it down

17 Storing the Machine

If the machine is to remain out of use for
approx. 3 months or more
► Drain and clean the fuel tank in a well ventila‐
ted place
► Dispose of fuel in accordance with the regula‐
tions and having regard for the environment
► Run the engine until the carburetor is dry, this
helps to prevent the carburetor diaphragms
sticking together
► Remove the abrasive wheel
► Thoroughly clean the machine
► Store machine in a safe and dry place. Protect
against unauthorized use (e. g., by children)
17 Storing the Machine
0458-520-8321-B