Starting / Stopping The Engine - Stihl TS 440 Instruction Manual

English
11.4 Closing the filler cap
► Fit the cap and turn it until it engages in the
bayonet catch
► Press the cap down as far as possible with
your hand and turn it clockwise (approx.
1/8 of a turn) until it engages properly
11.5 Checking the lock
► Grip the cap – the cap is closed properly if it
cannot be removed and the markings (arrows)
on the cap and fuel tank are aligned
If the cap can be removed or the markings do not
align, close the cap again – see sections "Clos‐
ing the cap" and "Checking the lock".
22
1.
2.

12 Starting / Stopping the Engine

11.6 Changing the fuel pickup body
every year
► Drain the fuel tank
► Pull the fuel pickup body out of the tank with a
hook and disconnect it from the hose
► Connect a new fuel pickup body to the hose
► Return the fuel pickup body to the tank
12 Starting / Stopping the
Engine
12.1 Checking the correct operation
of the abrasive wheel brake
Each time before starting work
1
► Pull up brake lever (1) toward handlebar and
hold it there – it should be possible to turn the
abrasive wheel by hand
0458-520-8321-B