Table of Contents
Advertisement
GETTING STARTED
Here are a few tips to help you assemble your barbecue quickly and successfully:
Follow all instructions in the order they are given.
•
Read and understand the full instructions for each step before carrying it out.
•
Check that no parts are missing by placing all the individual parts on an empty
surface.
•
If, despite careful factory checks, a component is missing, please contact
help.Kogan.com for support.
•
Sort out the small parts, as some of the screws and bolts, for example, are very
similar and can be easily confused.
•
For assembly you will need a medium size screwdriver and a suitable spanner (flat
spanner or box spanner).
•
You will need a flat spanner to connect the gas cylinder. Only use tools that are
intact and suitable for the job at hand. Worn or unsuitable tools will not allow you
to tighten the bolts sufficiently but will damage them to the extent that they can
no longer be turned.
•
Always fit all connecting elements (screws, bolts, nuts, etc.) as shown in the
following illustrations. If you misplace a connecting element, replace this with an
identical part to ensure proper function and stability.
Advertisement
Table of Contents
