Kenmore 111.2215 Series Manual page 16

Door Swing Reversal (Optional)
4 Locate the cabinet left corner top hinge
cover in the accessories bag shipped
with the appliance. Detach the door light
switch from the previously removed right
corner top hinge cover and attach it to
the left corner top hinge cover according
to the following instructions.
To detach switch:
1. Insert flat blade screwdriver tip into
gap between non-plunger side of switch
and hinge cover wall. Carefully pry
back tip against wall to release that
side of switch.
2. Push and hold plunger all the way in
and raise switch out of hinge cover.
To attach switch:
1. Secure tab on non-plunger side of
switch beneath its hinge cover wall
hook.
2. Raise switch slightly and push plunger
down against side of hinge cover wall.
3. Lower switch down to secure tab on
plunger side beneath its hinge cover wall
hook. At same time plunger will pop
through its hole in hinge cover wall.
16