Drawers; Refrigerator Shelves; Instaview - LG LRSDS2706 Series Owner's Manual

Drawers

Removing/Assembling Drawers
1
To remove drawers, pull them out to full
extension, lift the front, and pull straight out.
NOTE
cover to help remove or insert the drawer.
2
To assemble drawers, slightly tilt up the front,
insert into the frame and push back into
place.
CAUTION
drawers. The compartment is heavy when filled
with food and may cause injury if dropped.
assembling drawers.
Fresh Zone drawer. Do not remove the water
tank or water leakage may occur. The water tank
is not a removable part.
Water tank (Type A)
a
Water tank (Type B)
b

Refrigerator Shelves

The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Detaching/Assembling Shelves
CAUTION
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
1
To detach, remove all items from the shelf.
Lift the back of the shelf slightly to disengage
the rail stops.
2
Holding the shelf with both hands, tilt the
shelf and pull it out.
3
To assemble, tilt the front of the shelf up and
guide the shelf into the slots at a desired
height, keeping shelf holder down.
4
Slide the shelf in, then lower the front of the
shelf.
CAUTION
the other. Failure to do so may result in the shelf
falling or spilled food.

InstaView

This feature is only available on some models.
OPERATION 31