Epson Stylus Photo RX620 Start Here Manual page 6

M a c i n t o s h
1
Insert your RX620 software CD-ROM into your CD-ROM or DVD drive.
2
Double-click the
CD-ROM icon, if necessary. Then
double-click the
icon. You see this screen:
3
Click Install.
4
Read the license agreement, then
click Agree.
Note: If you're installing on Macintosh OS X, enter your
administrator name and password, if necessary.
5
Macintosh OS X: Continue with the following steps.
Macintosh OS 9: Follow any on-screen instructions,
then continue with step 9.
6
Click Install at the EPSON Scan
Installer screen to install the
scanner portion of your software.
7
When the software finishes
installing, click Quit.
8
Follow the on-screen instructions to install additional software.
Note: Click Quit when each part finishes installing.
9
When installation is complete, you see the Additional Software screen.
Follow the instructions on the screen to install the software. When
done, click Exit.
1 0
Close any open screens, remove the CD-ROM, and restart your
Macintosh.
1 1
Plug the flat end of the USB cable into any available USB port on your
Macintosh.
Follow the instructions below to add the RX620 to the Print Center or Printer
Setup Utility (for OS X) or the Chooser (for OS 9).
Selecting the RX620 for Mac
1
Open the OS X Applications folder, then open the Utilities folder and
start Print Center or the Printer Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the
Add button.
3
On the next screen, select EPSON USB from
the pull-down menu.
4
Click Stylus Photo RX620.
Note: If the RX620 doesn't appear, make
sure it is turned on and securely connected
to your Macintosh.
5
Click the Add button. You see the Stylus Photo RX620 in the
Printer List.
6
Quit Print Center or the Printer Setup Utility. Now you're ready to copy,
scan, and print. See the Quick Guide or your on-screen Reference
Guide for instructions.
Epson
Epson installer
® OS X
continue