Copy And Restore Print Settings - Epson Stylus NX510 Series Quick Manual

Copy and Restore Print Settings

Press the button to change settings. When you're done, press
Menu
■
To adjust the copy size, select
choose (to select a percentage using
Actual
(to automatically size the image to fit your paper).
■
To change the paper type, select
you loaded.
Paper type
Plain paper
Epson Bright White Paper
Epson Presentation Paper Matte
Epson Premium Presentation Paper Matte
Epson Premium Photo Paper Glossy
Epson Premium Photo Paper Semi-gloss
Epson Ultra Premium Photo Paper Glossy
Epson Photo Paper Glossy
■
To change the paper size, select
Note:
Paper Size options depend on the Paper Type you choose.
■
To change the print quality, select
.
Best
Note:
You can only adjust the Quality setting when you select Plain Paper as your Paper
Type setting; otherwise, the setting will be Standard. When you are restoring or
cropping photos, the Quality setting is set to Standard and you cannot adjust it.
■
To adjust the darkness or lightness of the print, select
higher (darker) or lower (lighter) setting.
■
To adjust the amount of image expansion when printing borderless photos,
select and choose
Expansion
Note:
You may see white borders on your printed photo if you use the Minimum setting.
(reduction/enlargement) and
Reduce/Enlarge
or ) or
+ –
and choose the type of paper
Paper Type
Paper Type setting
Plain Paper
Matte
Prem. Glossy
Ultra Glossy
Glossy
and choose the size you loaded.
Paper Size
and choose
Quality
, , or
Standard Medium
Copy and Restore Print Settings
.
OK
Auto Fit Page
, , or
Draft Standard
and choose a
Density
.
Minimum
13