Restoring And Cropping Photos - Epson Stylus NX400 Series Quick Manual

Restoring and Cropping Photos

You can restore old, faded photos to their original brilliance. You can also crop
your photos to zoom in on the subject.
Note:
To restore photos larger than 5 × 7 inches, use the NX400 Series software on your
computer.
1. Press the P
2. Load 4 × 6-inch, 5 × 7-inch, letter-size, or A4-size Epson photo paper.
3. Place your original photo on the document table.
Note:
You can copy up to 2 photos at the same time. Place
them 0.2 inches (5 mm) apart.
4. Press the
5. To turn on
and press
On
not turn on
6. Press
OK
settings over a preview of your photo:
7. To print more than 1 copy, press
number.
8. If you want to crop your photos and enlarge the
resulting image area to fit onto your paper, press
Display/Crop
■
To resize the image area, press
■
To move the image area, use the arrow buttons.
■
To check the zoomed image, press
After you are done cropping your photo, press
9. To change print settings, press
your settings (see page 13). When you're done,
press
OK
10. Press x
Clear Settings
12
Copying a Document or Photo
button to turn on the NX400 Series.
On
button, and press
Photo
Color Restoration
. (If your photo is not faded, do
OK
Color Restoration
again to prescan your photo. You see these
.
.
to begin copying. If you need to cancel copying, press
Start
.
.
OK
, press r and select
.)
or to select the
+ –
or .
+ –
.
OK
OK.
and select
Menu
Stop/
y