Problems And Solutions - Epson Stylus CX5000 Series Quick Manual

Light: status
Error: Flashing
b
fast
Error: On
b
B Ink: On
All other lights:
Flashing
All lights:
Flashing

Problems and Solutions

Check the solutions below if you're having trouble using your Epson Stylus
CX5000 Series all-in-one.
Printing and Copying Problems
■
Make sure your original is positioned in the top left corner of the glass. If the
edges are cropped, move your original away from the edges slightly.
■
Make sure your paper is loaded short edge first and is positioned against the
right edge guide with the left edge guide against its left side. Don't load paper
above the arrow mark inside the left edge guide.
■
Make sure the paper size settings are correct for the paper you loaded.
42
Solving Problems
Copies
window status Cause
H The paper thickness
lever is set to the
^
E A CX5000 Series part
needs to be replaced.
E There is a problem
with the CX5000
Series.
H position.
Solution
If you have set the lever to the
^
H position because you are
printing envelopes, press
x Start Color to continue.
Otherwise, set the lever to the
m
L position.
Contact your local authorized
servicer or contact Epson for a
referral; see page 44.
Turn the CX5000 Series off and
then back on. If the error does
not clear, contact your local
authorized servicer or contact
Epson for a referral; see
page 44.