Removing Your Card - Epson Artisan 810 Series Quick Manual

Make sure the image files on your card meet these requirements:
File format
Image size
Number of files
2. After you insert the card, the memory card
access light flashes, then stays on.
Caution:
Do not remove the card or turn off the Artisan
810 Series while the light is flashing, or you may
lose data on the card.
3. See page 26 to select and print your photos.

Removing Your Card

After you finish printing your photos, follow these steps to remove the card:
1. Make sure the memory card access light is not flashing.
2. If the Artisan 810 Series is connected to your computer with a USB cable, do
one of the following before removing the memory card or turning off the
printer:
■
Windows: Click the
remove USB Mass Storage Device
■
Macintosh: Drag the
trash.
3. Pull the card straight out of its slot.
24
Printing From Your Camera's Memory Card
JPEG with the Exif version 2.21 standard
80 × 80 pixels to 9200 × 9200 pixels
Up to 9990 (If there are more than 999 photos on the
card, you can select a group of photos to display.)
or icon on the taskbar and select
removable disk icon from your desktop into the
Memory card access light
.
Safely