Caring For Your Monitor; Detaching The Monitor Stand; Wall Mounting (Optional) - Lenovo ThinkVision T24v-20 User Manual

Caring for your monitor

Detaching the monitor stand

Wall Mounting (Optional)

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not :
Apply water or liquid directly to your monitor.

Use solvents or abrasives.

Use flammable cleaning materials to clean your monitor or any other electrical equipment.

Touch the screen area of your monitor with sharp or abrasive items. This type of contact may

cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This may harm the

coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.

Remove grease or finger marks with a damp cloth and a little mild detergent.

After placing the monitor face down on a clean and soft surface, push the hook of the stand and lift
the stand up to remove it from the monitor .
Refer to the instructions that come with the VESA compatible base mounting kit.
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Remove the stand.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the
base mounting kit.
Note: For use only with UL and GS Listed Wall Mount Bracket with minimum weight/load
bearing capacity of 6.00 kg. In order to fulfil TCO Certification for this wall mounting option,
shielded power cable is mandatory to be used. Attach the mounting bracket from the VESA
compatible wall mounting kit(100mm x100mm distance), the type of VESA mounting screw is
M4 x 10 mm.
Chapter 2. Adjusting and Using your monitor 2-12