Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Swift EB608D
Summary of Contents for Swift EB608D
- Page 1 40V LITHIUM-ION CORDLESS POLE CHAINSAW Model: EB608D Operations Manual...
-
Page 2: Intended Use
TABLE OF CONTENTS Intended Use According to the type and construction of the tool, the This chainsaw tool is following potential hazards might apply: • Symbols……………………....2 - designed for cutting brushes, Contact with exposed saw teeth of the saw Do not expose to rain or water •... -
Page 3: Work Area Safety
Electrical Safety ways in which the tool is used dependent power tool. Do not use a power tool while properly used. Use of dust collection can on the following examples and other Power tool plugs must match the outlet. you are tired or under the influence of drugs, reduce dust-related hazards. -
Page 4: Safety Warnings For Battery Pack
Service • Use the power tool, accessories and tool 2. Do not short-circuit a battery pack. Do not When cutting a branch which is under tension, Have your power tool serviced by a qualified repair bits etc. in accordance with these expect it to spring back. -
Page 5: Chainsaw Safety Warnings
Use of the chainsaw for temperature between 50 and 77 °F. Swift. Do not use any charger other injury. operations different than intended could result in a than that specifically provided for use with the 6. -
Page 6: Additional Safety Instructions
• • 1. Maintain a firm grip, with thumbs and fingers Switch the unit off and remove the battery under follow the supplied installation instructions and Protect the battery from heat, e.g. from encircling the chain saw handles, with both hands the following conditions: remove the battery beforehand. -
Page 7: Noise And Vibration
MAJOR PARTS OF THE POLE Noise and vibration CHAINSAW NOTE: Values for the A-weighted sound pressure level and for the total vibration values can be found in the “Technical specifications” table. CAUTION: The indicated measurements refer to new power tools. Daily use causes the noise and vibration values to change. -
Page 8: Technical Specifications
TECHNICAL SPECIFICATIONS Checking the chain lubrication NOTE: The batteries (optional; depending on delivery scope) are not fully charged on delivery. Prior to initial operation, charge the batteries fully. See user manual of Tool Pole Chainsaw the battery charger. Model EB212D Voltage Lubricating the chain Battery pack... -
Page 9: Battery State Of Charge
Adjustments before using CAUTION: Protect the battery contacts when the battery The indicator goes out after 3 seconds. If one of the WARNING: Before performing any work on the garden is not being used. Loose metal parts may short-circuit the LEDs flashes, the battery must be recharged. -
Page 10: Maintenance And Care
• • In the interest of your own safety: Perform only the • Pick up the power tool in both hands. For an accurate cut thick branches should be sawn Turn the chain tensioning wheel on • maintenance work described here yourself. All other Switch the pole saw on before starting the cut. -
Page 11: Disposal Information
Changing saw rail and saw chain • • Place saw chain around the saw rail starting on the Tighten the chain tensioning wheel anticlockwise to substances which may damage, attack or destroy WARNING: The teeth on the saw chain are very sharp! upper part of the rail. - Page 12 EU countries only: In accordance with Directive 2006/66/EC defective or used batteries must be recycled. NOTE: Please ask your dealer about disposal options! Guarantee/Warranty This product has been manufactured to the highest quality standards. When a new product is purchased, it is guaranteed a 24-month (pole chainsaw) and 12- month (battery) manufacturer’s warranty which comes into force on the date the product was purchased.
Need help?
Do you have a question about the EB608D and is the answer not in the manual?
Questions and answers