Advertisement
Normal Keypad Operation:
• If the user enters a 4-digit code that is matched to one of the 25 stored codes. The STATUS light should blink rapidly
and the beeper should beep three times to confirm that a matched code is entered.
• No more than 20 key presses are allowed to obtain the 4-digit entry code.
Example:
1234 is one of the codes stored in one of the memory location.
The user can enter 'x1234' or 'xxxxxxxxxxxxxxxx1234' and the gate should be activated (x is any key). If more than
20 key presses is entered without matching one of the codes then the unit's STATUS light should be flashing rapidly
and no entry will be accepted for the next 40 seconds. The user must not enter any code for at least 40 seconds before
the unit returns to normal operation; otherwise it remains in this 'lock-down' mode. Once the user enters a matched
code, any subsequent key press within the next 40 seconds will re-activate the keypad.
Keying Indication Summary:
Master Code Setting
Permanent Entry Code
Temporary Entry Code
Setting
Entry Code Matching
If you have any questions or concerns, please contact our Technical Service Department at 1-800-543-1236 or 850-575-4144.
Gates That Open, LLC • 3121 Hartsfield Road • Tallahassee, Florida 32303
Telephone (850) 575-0176 • Fax (850) 575-8912 • website www.gtoaccess.com
The contents of all material available on this installation manual are copyrighted by Gates That Open, LLC ("GTO"), unless otherwise indicated. All rights are reserved by GTO, and content
may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior, written permission of GTO. Any reprinting of GTO publica-
GTO®, GTO/PRO®, Mighty Mule® are registered trademarks of Gates That Open, LLC. Professional Access Systems™ is a trademark of Gates That Open, LLC. and are the exclusive
property of Gates That Open, LLC ("GTO"). All rights are reserved by GTO, and these marks may not be used, in any for without the prior, written permission of GTO.
Keying Error Alert Indication
Speaker: continuous Beep for 2 seconds
STATUS light: rapid flashing
Speaker: continuous Beep for 2 seconds
STATUS light: rapid flashing
Speaker: continuous Beep for 2 seconds
STATUS light: rapid flashing
Speaker: continuous Beep for 2 seconds
STATUS light: rapid flashing
tions is by permission only. Copyright infringement is a violation of federal law.
Keying accepted confirmation Indication
Speaker: Beep – Beep – Beep
STATUS light: no light, no flashing
Speaker: Beep – Beep – Beep
STATUS light: no light, no flashing
Speaker: Beep – Beep – Beep
STATUS light: no light, no flashing
Speaker: Beep – Beep – Beep
(after non-matching 20 keying)
STATUS light: no light, no flashing
Advertisement
