Connection At The Control Unit With Plug A-D - Viessmann Vitotrol 100 Installation Instructions For Contractors
Clock thermostat with digital time switch and wireless receiver
Hide thumbs
Also See for Vitotrol 100:
- Operating instructions manual (36 pages) ,
- Operating instructions for the system user (36 pages) ,
- Installation instructions for contractors (20 pages)
Table of Contents
Advertisement
Electrical connections at the control unit
Connection at the control unit with plug a-D
Recommended connecting cable
Cable with a cross-section of 1.5 mm²
for 230 V~
A Terminals inside the wireless
receiver
8
(cont.)
1. Remove jumper B between term-
inals 1 and 3 in plug a-D.
2. Route 230 V cables and low voltage
cables separately. Bundle with
cable ties.
Leave terminal 3 in the wireless
receiver free.
Advertisement
Table of Contents
