Connection At The Control Unit With Plug Gh - Viessmann Vitotrol 100 Installation Instructions For Contractors
Clock thermostat with digital time switch and wireless receiver
Hide thumbs
Also See for Vitotrol 100:
- Operating instructions manual (36 pages) ,
- Operating instructions for the system user (36 pages) ,
- Installation instructions for contractors (20 pages)
Table of Contents
Advertisement
Electrical connections at the control unit
A Terminals inside the wireless
receiver
Connection at the control unit with plug gH
Recommended connecting cable
Cable with a cross-section of 1.5 mm²
for 230 V~
A Terminals inside the wireless
receiver
(cont.)
Insert the jumper between terminals 1
and 4 in the wireless receiver.
Leave terminal 3 in the wireless recei-
ver free.
Insert the jumper between terminals 1
and 4 in the wireless receiver.
Leave terminal 3 in the wireless recei-
ver free.
7
Advertisement
Table of Contents
