Table of Contents
Advertisement
Press and hold the appropriate button for at least half of
a second. The indicator light will come on while the
signal is being transmitted.
Any of the three buttons can be reprogrammed by
repeating the instructions.
The programmed buttons should be erased when the
vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code on the
Universal Home Remote device:
1. Press and hold the two outside buttons at the
same time for approximately 20 seconds, until the
indicator lights, located directly above the buttons,
begin to blink rapidly.
2. Once the indicator lights begin to blink, release
both buttons. The codes from all buttons will be
erased.
For help or information on the Universal Home Remote
System, call the customer assistance phone number
under Customer Assistance Offices on page 8 6.
3-56
Lift up on the glove box lever to open it.
The vehicle has two cupholders in the center
console area.
The vehicle has a center console storage area located
between the front seats. It includes storage areas, and
accessory power outlet(s) on the rear of the console.
Use the convenience net, located in the rear, to store
small loads as far forward as possible. The net should
not be used to store heavy loads.
Advertisement
Table of Contents
