1. Manuals
  2. Brands
  3. Gold Century Manuals
  4. Metal Detector
  5. GC-1007
  6. User manual

Gold Century GC-1007 User Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

GC-1007 Metal Detector
USER'S MANUAL
Please read the manual before using the detector.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC-1007 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gold Century GC-1007

Summary of Contents for Gold Century GC-1007

  • Page 1 GC-1007 Metal Detector USER’S MANUAL Please read the manual before using the detector.
  • Page 2 QUICK ASSEMBLY Insert the coil cable plug into the 5 pin jack connected with S stem. Secure the nut on the plug properly. Loosen the lock nut on the mid stem and lengthen the stem. Sheathe the mid stem on S stem aligning the holes on the stems. Secure with the fixing knob.
  • Page 3 FEATURE With your metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector is versatile and easy to use. The detector’s features include: Headphone Jack—let you connect headphones (not supplied) and operate without trouble. LCD—shows the probable type of metal being detected .

  • Page 4: Installing Batteries

    6. Tighten the lock nut counter clockwise. 7. Turn the stem’s lock nut clockwise until it loosens. 8. Lengthen or shorten the stem so when you stand upright with the detector in your hand, the search coil is level with and about one half to 2 inches above the ground with your arm relaxed at your side.

  • Page 5: Operation

    detector so you can listen to it privately. Using headphone also saves battery power and makes it easier to identify subtle changes in the sounds you hear, for better detection results. To connect headphones to the detector, insert the plug into the headphone jack on the side of the control housing.
  • Page 6 tone. A low tone will be heard when iron is found and arrow will point to nail / bottle cap. Also LCD displays the probable depth of target. 3. Press MODE again to choose DISC mode. Then choose the unwanted target as follows: a.
  • Page 7 Metal Status Tone Display for Discrimination Ignored High for 25 cent, Flashing 10 cent, silver & arrow points Nail / bottle copper; nail cap (Iron ) Medium for 5 bottle cap cent / 1cent / pull tab / s-cap Flashing 5 cent arrow points Pull-tabs,...
  • Page 8 points to nail/ bottle cap. When it finds a non- ferrous target, it sounds a medium or high tone and arrow points to 5cent/1 cent/pull tab/ s-cap or 25 cent/ 10 cent. Search Coil Sweeping Hints: Never sweep the search coil as if it were a pendulum. Raising the ...

  • Page 9: Troubleshooting

    TROUBLE SHOOTING Problem Suggestion You might be sweeping the detector’s search coil The detector displays sounds false too fast or at the wrong angle. Sweep the search signals. coil more slowly and hold the detector correctly. The detector might sound a false signal if it detects heavily oxidized metals.

Table of Contents