Gold Century GC-1016A Owner's Manual
  1. Manuals
  2. Brands
  3. Gold Century Manuals
  4. Metal Detector
  5. GC-1016A
  6. Owner's manual

Gold Century GC-1016A Owner's Manual

Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
Gold Century
GC-1016A Metal Detector
Discriminating Metal Detector
OWNER'S MANUAL
And
Warranty

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC-1016A and is the answer not in the manual?

Questions and answers

Related Manuals for Gold Century GC-1016A

Summary of Contents for Gold Century GC-1016A

  • Page 1 Gold Century GC-1016A Metal Detector Discriminating Metal Detector OWNER’S MANUAL Warranty...
  • Page 2 FEATURES With your Metal Detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. This metal detector is versatile and easy to use. The detector’s features include: Two Operation Modes: ALL METAL, DISC ALL METAL—lets you search for all kinds of metal with auto ground balance and high sensitivity.
  • Page 3 fixing screw control box direction of IN on the handle to fix the latch in place. latch assembly hole 4. Tighten the fixing screw properly. 5. Insert the search coil cable plug into the five pin jack on the front control box’s housing.

  • Page 4: Listening Safely

    Cautions: Use only fresh battery of the required size and recommended type. If the detector is on, turn the power switch (on the control panel) to POWER OFF . Press on the battery compartment cover and slide the cover off in the direction of the arrow.

  • Page 5: Traffic Safety

    adjust the volume to a comfortable level.Do not listen at extremely high volume levels. Extended high volume listening can lead to permanent hearing loss.Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.
  • Page 6 All metal is used to find all kinds of metal targets. DISC is used to discriminate the metal type. In general case, user firstly sets the operation mode to ALL METAL, DISC to counter clockwise end, SENS to high position. Then hold the search coil parallel with the ground about 1~5cm above the surface.
  • Page 7 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the detector. Gold Century Warranty This product is warranted against defects in materials and workmanship for 1 year from date of purchase. The item must be shipped at buyer’s expense to our offices where we will, at our discretion, repair or replace it free of charge.

Table of Contents

Save PDF